SILBERSALZ35 200T is genuine cinema film: unmodified Kodak Vision3 — the negative Hollywood shoots on — loaded into metal cartridges for any 35 mm camera. ISO 200, balanced for tungsten light (3200 K), 36 exposures, ECN-2 process.

How the picture looks

Vision3 announces itself by what is missing: no shouting saturation, no blown highlights, no blocked shadows. A cinema negative is built for enormous latitude and a grading pass afterwards, so the picture comes out soft, slightly muted and very malleable — with headroom a scan can push in any direction. The grain is fine and even, and skin renders without going red.

What to shoot on it

Artificial light without correction: interiors, the city at night, concerts, a kitchen under a yellow bulb. Daylight works too — bring an amber conversion filter or fix the white balance in the scan. Add anything that needs latitude: backlight, a window in frame, sunset work where the gap between sky and shadow is wider than a consumer film will hold.

How to shoot it

The DX code on the cartridge is deliberately down-rated — it is coded ISO 100, exactly one stop below the real speed, because the maker recommends overexposing this film by a stop. In a camera that reads DX automatically you need do nothing; it will give you that stop. In a camera with a manual ISO dial, set 100, not 200. A cinema negative likes light: the extra stop goes into shadow density, not into lost highlights.

Processing and scanning

Here is the thing to know before you buy. The film is entirely unmodified, which means the remjet is still on it — the black backing layer that only the ECN-2 process removes. It cannot go to an ordinary C-41 minilab: the results are visibly worse and the lab's machine ends up contaminated. You need ECN-2 development, or the maker's own processing voucher. Check with your lab before you shoot the roll, not after.

How it compares

The nearest alternative is CineStill: the same Vision3, but with the remjet stripped at the factory for C-41 compatibility — which is where the famous red halo around bright lights comes from. SILBERSALZ35 leaves the film alone: no halo, colour closer to what the cinematographer saw on set, but development demands ECN-2. It is a choice between convenience and fidelity.